This pre-wired, tested Radian Inverter System is unique to the renewable energy market because it combines both off-grid and grid-tie capabilities into one piece of equipment. As with most any grid-tied system, it will allow you to sell excess power that your solar panels generate back to the utility company, but you’ll also have the added security of a back up system, if you choose.
The 8,000-watt Radian Inverter Center will:
- Protect you from utility power outages.
- Give you a return on your investment with its grid-tied net-metering capabilities (in areas where grid-tied power and net metering programs are available).
- Be expandable, allowing up to 10 Radian Inverters to be connected in parallel for up to 80,000 watts of power.
- Accommodate up to 4kW of solar panels.
- Accommodate even more solar panels by adding additional charge controllers. Each FM80 Charge Controller will accommodate 4 kW of solar panels. We also offer this inverter system with two charge controllers instead of one.
- Give you the choice of starting out with an “off-grid” system and expand it to use its grid-tied capabilities, if a utility company is accessible, or vice versa.
- Be simple, easy and safe to install.
Call us at (1-800-472-1142) to find out if this solar power system is right for you. Wholesale Solar will custom design any system to match your particular application.
|1||Outback Power GS8048||Inverter|
|3||MidNite Solar MNSPD-300-AC||Surge Suppressor|
|2||MidNite Solar MNSPD-300-DC||Surge Suppressor|
|1||Outback Power MATE3||Inverter Accessory|
|1||Outback Power GSLC175-120/240||Inverter Accessory|
|1||Outback Power FX-CCB2||Accessory|
|4||MidNite Solar MNEDC-100||Breaker|
|2||MidNite Solar Classic 150 MPPT||Charge Controller|
|1||Outback Power FLEXnet DC System Monitor OutBack Power||Inverter Accessory|
|1||Outback Power Hub-4 OutBack Power||Inverter Accessory|
|1||1" Plastic Heyco Straight Male Adaptor||Misc|
|3||Terminal Lug #4, Lug Copper LD 3/8" hole|
|1||Outback Flexware FWMB3S Surfacemount MATE3 Mounting Bracket||Inverter Accessory|
Features & Attributes
- Simple and safe installation.
- Clearly labeled connection points for AC and DC input and output.
- Fully assembled and tested by experienced factory trained technicians.
- All required internal cables, connectors, brackets, and breakers.
- Will take power from solar panels, wind power, or generators.
- The capacity to add up to 4 kW of solar panels.
- A safe NEC compliant design.
- Ability to expand up to 80,000 watts.
- Inverter: 28 x 16 x 8.7''
- Load Center: 17''x 16" x 8.5''
- Charge controller: 16.25''x 5.75''x 4''