Wholesale Solar Logo
1-800-472-1142
You're logged in as a dealer. Where applicable, special dealer pricing is shown with a purple "Add to Quote" button instead of the blue "Add to Cart" button.

Discontinued Product

Wholesale Solar no longer offers the Primus Windpower AIR X Roof Mount Kit no seal for Air only (base plates, isolators & hardware)

The following item(s) may be suitable for replacement:

Or See our other Wind Turbines

Please call to verify compatibility.

Primus Windpower AIR X Roof Mount Kit no seal for Air only (base plates, isolators & hardware)

  • Why Off Grid Systems Should Include Both Solar AND Wind

    • Wind speeds are highest during the winter months when solar resources are at their minimum
    • Air density is highest in winter maximizing wind power production
    • Wind provides power during inclement weather when sunshine is not present
    • Wind provides power at night

    If Wind, Why AIR?

    • Reliability: 5-year warranty with over 150,000 units installed globally since 1995
    • Up Tower Controller: Integrated controls inside the turbine regulate battery voltage
    • Ease of Installation: Air is wired directly to battery bank, independent of PV controller and wiring
    • Certifications: CSA approved to UL and CSA specifications*
    • Quiet Operation**

Product Information

Model Part No. Volts(DC) Watts Start-up Wind Speed (mph) Monthly Output (kWh) @ 12-13.4 mph price
Primus Windpower AIR X Roof Mount Kit no seal for Air only (base plates, isolators & hardware)6935022CALL

Description

Primus Windpower AIRX Roof Mount Kit

Simple roof top tower mounts offer easy low cost installation for single or multiple AIR wind generators. These kits are designed with effective built-in vitabration isolation mounts. Installs on the side of a building or through the roof. An optional roof seal is available.

Kits include: Isolators, Base Plates, Clamp Sleeves, Clamp Straps, 5/16 x 1 Bolts, 5/16 Lock Washers, Safety Leashes.

These tower kits can be used to mount your AIR403 through the roof of a building or along the side of a building. If the wind generator will be mount through the roof, the roof seal is strongly recommended. None of the kits include the lag bolts that connect the tower to the building or the mounting pole (1 1/2" schedule 40 aluminum or schedule 20 steel pipe must be used).

vBack to Top

Features & Attributes

  • Weight: 2 lbs
  • Easy Installation
  • 27' or 45' Air Kit available.
Back to Top

About Primus Windpower

Why Off Grid Systems Should Include Both Solar AND Wind

      
  • Wind speeds are highest during the winter months when solar resources are at their minimum.
  • Air density is highest in winter maximizing wind power production.
  • Wind provides power during inclement weather when sunshine is not present.
  • Wind provides power at night.

If Wind, Why AIR?

      
  • Reliability: 5-year warranty with over 150,000 units installed globally since 1995.
  • Up Tower Controller: Integrated controls inside the turbine regulate battery voltage.
  • Ease of Installation: AIR is wired directly to battery bank, independent of PV controller and wiring.
  • Certifications: CSA approved to UL and CSA specifications.
  • Quiet Operation
Back to Top