Inverters and solar panels for RV and marine applications

Just about any solar panel will work for an RV or Marine application. However some are better than others. Most panels over 125 watts are 24 volt panels and won't work with 12 volt systems. In many cases even 125 watt panels are too big for the sometimes limited space on the roof. Two 60 watt panels may work better. For a list of all panels we sell click here.

The temperatures on the roof of an RV can be very hot especially when panels are "flush" mounted, actually a couple of inches off the roof. High temperature lowers voltage output of panels and power to your batteries. We have found that single crystal or mono crystal panels, which start out with a higher voltage, tend to work really well in mobile environments and we include them in our RV kits.

A lot of people ask about durability of solar panels on the road or water with the twisting and flexing going on not to mention flying rocks and road debris. Solar panels are covered with tempered glass that is rated to take the impact of a 1" hailstone at 50 m.p.h.! And if you have ever tried to walk through a closed sliding glass door you know that tempered glass is pretty tough.

Inverters for On the GO!

Being able to run household appliances on the road or on the high seas is a great convenience. An inverter made for that purpose will give you years of high quality, trouble-free power. Some people just use small "Big-Box Mart" inverters for their RV's and it works out fine but when you get into inverters that charge batteries things change.

If you ever plan to connect to "shore power" from your garage, the KOA or your marina you should only use an inverter / charger that is "mobile" rated by UL. These inverters provide automatic "ground switching" between the vehicle ground and the ground coming from the shore line.

All AC systems should have a "bond" between the neutral and ground wire only one place in the system. That place is usually at the meter of the system like on your house. Mobile inverters have this bond built-in for when you are on the road. It provides a "path to ground" for errant AC power and is a safety connection. When you connect to the shore, that power already has a bond back by the KOA or marina power meter and you don't want two "bonds". "Mobile" rated inverters can sense this connection to the shore line and disconnect their internal bond and use the one from shore. When you unplug the inverter re-connects its own bond.

Some of the inverters here are available in 24 volt input versions. To see a list of all our inverters click here.

The inverters below are ones we recommend for RV and Marine use. Call if you need further info on which one is right for you. Note some of the inverters are "modified sinewave and some are "sinewave". To read about the difference click here.

Xantrex FDM 458-10-12

1,000 watts / 50 amp charger

modified-sine

Xantrex FDM 458-15-12

1,500 watts / 75 amp charger

modified-sine

Xantrex FDM 458-20-12

2,000 watts / 100 amp charger

modified-sine

Xantrex FDM 458-30-12

3,000 watts / 140 amp charger

modified-sine