Wholesale Solar Logo
You're logged in as a dealer. Where applicable, special dealer pricing is shown with a purple "Add to Quote" button instead of the blue "Add to Cart" button.

Outback Power MX60 Charge Controller

Outback Power logo
Outback Power:
  • Trusted name in the renewable energy field, with a solid foundation in engineering
  • World-class customer service and technical support

Product Information

Model Part No. Battery Bank
Voltage (Volts DC)
Max Current Output
Per Controller
Outback Power MX60 Charge Controller350060212/24/48VDC60ACALL


Rated at up to 60 amperes of DC output current, the Outback MX60 can be used in systems to charge 12, 24, 36, 48, and even 60 volt battery banks. The MX60 can accept PV open circuit voltages as high as 150VDC. The MX60's control set points are fully adjustable to allow its use with virtually any battery type.

The revolutionary design of the Outback MX60 allows the use of high voltage PV arrays to charge a much lower battery voltage - such as charging a 24 volt battery from a PV array wired for 48 volts. This type of configuration reduces losses, increases efficiency, and allows the use of smaller wire from the PV array to the controller.

An optional Outback Mate can be connected to the Outback MX60 to allow monitoring and control of up to eight MX60's (or a combination of Outback controllers and inverters from a distance of up to 300 feet). The Mate also includes a data port for connection to a PC computer for data monitoring.

This charge controller is not available and has been replaced by the Flex Max 60.

Back to Top

Features & Attributes

  • Weight: 14 lbs
  • Easy to use and understand LCD display
  • Rated to 60 A DC output current
  • Fully adjustable control set points
  • Allows use with virtually any battery type
  • An optional Mate can be added to allow monitoring and control from up to 300 feet away
  • Two year warranty
Back to Top


Outback Power MX60 Charge Controller

Product Manual
Spec. Sheet
Back to Top

About Outback Power

Key Points:

  • Extended warranty, not offered by competitors
  • A trusted name in the renewable energy field, with a solid foundation in engineering
  • World-class customer service and technical support

Headquartered out of Arlington, Washington, OutBack Power was founded in 2001 by a small group of passionate engineers. The small startup quickly earned a reputable foundation by listening to their customers and incorporating many of the changes that were suggested, truly establishing a customer focused company. Today, they are a trusted name in the renewable energy field, offering a vast selection of innovative products that were exclusively pioneered by OutBack Power. Their product line includes off grid inverters, grid-tie inverters with battery backup, maximum power point tracking (MPPT) charge controllers, and communications/network products, along with a wide range of integration and safety hardware. Outpacing many of their competitors, OutBack Power offers an extended warranty option on many of their inverters.

OutBack Power is constantly expanding their industry leading level of customer service with dedicated, direct dial, tech support lines as well as an online "live-chat" service. As a distributor for OutBack Power products, Wholesale Solar is an integral part of the high level of support that customers have come to expect from OutBack Power.

OutBack Power is highly known for providing rugged inverters and charge controllers designed to survive in environments that would normally destroy other inverter/chargers. The FX series of sealed inverter/chargers comes with some of the most rugged features one can find on sealed systems. Some of these features include die-cast aluminum chassis with a powder-coated finish to prevent corrosion, generous use of gaskets and O-ring seals to keep water and small particles out, and a protective conformal coating on all circuit boards. The externally mounted "turbo" cooling system will keep your FX series inverter/charger running at peak performance in high heat conditions.

The FLEXnet ™ DC system has been leading the way in DC system monitoring devices. Integrated networked data from your system easily allows you to stay in constant touch with your system's level of performance and efficiency. The FLEXnet™ DC module seamlessly conforms to either the FW500-DC or the FW1000-DC enclosures, and can easily monitor up to three shunts.

OutBack Power also offers grid-interactive versions of their inverter/chargers, which come in either sealed (GTFX) or vented (GVFX) models, allowing you to sell solar, wind, and/or hydro power back to the utility grid. Utilizing a built-in 60A transfer switch, AC power is seamlessly switched between utility and battery power. For 120/240V power output configurations, the G series can easily be combined or "stacked". Back to Top