- Website: http://www.ironridge.com/
- Made in: United States, Mexico and China
- Warranty: 10 years structural, 20 years functional
- High wind/snow load ratings
High wind/snow load ratings
Constructed from the highest quality aluminum and stainless steel
Iron Ridge packs 25% more wattage on the same sub-structure. The signature curved rail, the XR is available in three sizes. The new FlashFoot eliminates the need for seperate standoffs, flashings and L feet.
|IronRidge Conduit Mount Flashing (4) pack Black||6404196|| |
|IronRidge FlashFoot 2 Kit Single, Black Bonded||6404206|| |
|IronRidge FlashFoot 2 Kit Single, Silver Bonded||6404197|| |
The optional Diagonal Brace Assembly kit is for installations that require extra support. The diagonal brace kit includes the brace, sleeves, and hardware for installation between one north and south pair of support legs. Rail Connectors secure IronRidge Standard Rails to the Schedule 40 horizontal cross pipes. Each Standard Rail requires two connectors to create a secure attachment. Installing Diagonal Brace Assembly
Diagonal Brace Assembly
Diagonal Brace Assembly Installed on a
Northern and Southern Pier
The IronRidge Top Caps facilitate the quick and easy construction of a Schedule 40 substructure. Available in sizes that fit either 2” or 3” Schedule 40 pipe, this Top Cap secures quickly to multiple pier types with 3 set screws and also supports cross piping (schedule 40) with U-bolt hardware. Installing Top Cap
Top Cap Installed on
Vertical and Horizontal Poles
Rail Connectors secure IronRidge Standard Rails to the Schedule 40 horizontal cross pipes. Each Standard Rail requires two connectors to create a secure attachment. Installing XR1000 Rail Connector
XR1000 Rail Connector
XR1000 Rail Connector Mounted to
Horizontal Pipe and Rails
|IronRidge 2" SGA per 65" X 39" per module||6912153||CALL|
|IronRidge 3" SGA per 65" X 39" per module||6912151||CALL|
|IronRidge 3" SGA per 77" X 39" per module||6912154||CALL|
|IronRidge XR10 Rail - 14ft||6500013|| |
|IronRidge XR100 Rail - 11ft||6500015|| |
|IronRidge XR100 Rail - 14ft||6500016|| |
|IronRidge XR1000 Rail - 11ft||6500018|| |
|IronRidge XR1000 Rail - 14ft||6401684|| |
IronRidge Mid Clamps save time and labor by bonding modules directly to the rails which are be grounded by a single grounding lug. Each grounding mid clamp pierces through the anodized coatings of the module and the rail to form secure electrical bonds, eliminating the need to attach a separate grounding lug to each panel.
Integrated Ground Mid Clamps - Installation Overview
Ironridge End Clamps
IronRidge End Clamps secure PV modules to the rail when there are multiple modules in a row. The end clamp fits between two adjacent modules, providing clamping pressure to both modules simultaneously. The end clamps are not dependent upon the PV module's mounting holes and fit to the top slots of either Standard or Light Rails.
Installing End Clamps on XRL Rails
Installing End Clamps on XR1000 Rails
End Clamp on XRL
End Clamp on XR1000
Available for both Standard (XR1000) and Light (XRL) Rails, end caps provide a finished look while protecting against the collection of water and debris inside the rail. End caps are molded from black polycarbonate with UV protection.
End Cap for XRL
End Cap for XR1000
The IronRidge Light Rail is a super-light, highly cost-effective rail that spans over six feet under typical load conditions. This rail has a top slot for easy top mounting and is manufactured using extruded aluminum alloys.
The IronRidge Standard Rail (previously XRS) is a high performance rail that spans over twelve feet under typical load conditions. This rail has slots for both top and bottom PV module mounting and is manufactured using extruded aluminum alloys.